China Standard Cylindrical Roller Bearing for Gear Reducer 65X93.1X55mm with Good quality

Product Description



 Cylindrical Roller Bearing for Gear Reducer 65X93.1X55mm

Greese/Oil As your requirement, such as open, z,zz,rz, 2rz,rs, 2rs, and so on.
Vibration Z1/V1,Z2/V2,Z3/V3
Precision P6, P0, P5, P4, P2
Internal clearance codes  
C0, C2, C3, C4, C5
Snap ring N, NR
Feature Low voice, High speed, Low friction, long service life
Application Pharmaceutical equipment, medical equipment, textile machinery
and accessories, knitting machines, weaving machines, spinning
equipment, textile accessories, non-woven fabric machinery,
textile equipment, machinery, metal, mold, automotive
electronics, electrical, instrumentation, military, aviation
aerospace, plastics and rubber industry, medical and other fields.
Package 1,barreled package+outer carton+pallets 
2,single box+outer carton+pallets 
3,tube package+middle box+outer carton+pallets 
4,According to your’s requirement
Details We have a complete process for production and quality assurance to make sure our products can meet your requirement.
2.Windage test
4.Rotary test
5.Greasing and gland
6.Noise inspection
7.Appearance inspection
8.Rust prevention

The cylindrical roller bearing is the radial rolling bearing with the cylindrical rollers. The internal structure of the bearing adopts a parallel arrangement of rollers. This type of bearings is the separable bearing. Separate inner ring and outer ring, which are very convenient to install and disassemble, with the advantage of large radial load capacity and low friction coefficient. 

The bearing can be divided into single-row, double-row, and multi-rows cylindrical roller bearings according to the number of rows of rolling elements. There are also differences in the design of the position of the ribs.


Model List (Please contact with us for more models)



Bearing Number Boundary dimensions(mm) Basic load ratings(kN) Limiting speeds(rpm) Mass(Kg)
    d D B rs min rs1 min Cr Cor Grease Oil (Approx.)
NU10 Series NU1005 25 47 12 0.6 0.3 15.1 14.1 16,000 19,000 0.092
  NU2211E 55 100 25 1.5 1.1 97 114 5,600 6,600 0.968
  NU2212 60 110 28 1.5 1.5 96 116 5,800 6,800 1.06
  NU2212E 60 110 28 1.5 1.5 131 157 5,200 6,100 1.21
  NU2213 65 120 31 1.5 1.5 120 149 5,400 6,300 1.4
  NU2213E 65 120 31 1.5 1.5 149 181 4,800 5,600 1.6
  NU2214 70 125 31 1.5 1.5 119 151 5,000 5,900 1.47
  NU2214E 70 125 31 1.5 1.5 156 194 4,500 5,200 1.7
  NU2215 75 130 31 1.5 1.5 130 162 4,700 5,500 1.55
  NU2215E 75 130 31 1.5 1.5 162 207 4,200 4,900 1.79
  NU2216 80 140 33 2 2 147 186 4,400 5,100 1.93
  NU2216E 80 140 33 2 2 186 243 3,900 4,600 2.12
  NU2217 85 150 36 2 2 170 218 4,100 4,800 2.44
  NU2217E 85 150 36 2 2 217 279 3,700 4,300 2.68
  NU2218 90 160 40 2 2 197 248 3,900 4,600 3.1
  NU2218E 90 160 40 2 2 242 315 3,500 4,100 3.33
  NU2219 95 170 43 2.1 2.1 230 298 3,600 4,300 3.79
  NU2219E 95 170 43 2.1 2.1 286 370 3,300 3,800 4.14
  NU2220 100 180 46 2.1 2.1 258 340 3,500 4,100 4.57
  NU2220E 100 180 46 2.1 2.1 335 445 3,100 3,600 5.01
  NU2222 110 200 53 2.1 2.1 320 415 3,100 3,700 6.56
  NU2222E 110 200 53 2.1 2.1 385 515 2,800 3,300 7.4
  NU2224 120 215 58 2.1 2.1 350 460 2,900 3,400 8.19
  NU2224E 120 215 58 2.1 2.1 450 620 2,600 3,000 9.18
  NU2226 130 230 64 3 3 380 530 2,600 3,100 10.2
  NU2226E 130 230 64 3 3 530 735 2,300 2,700 11.8
  NU2228 140 250 68 3 3 445 635 2,400 2,800 12.9
  NU2228E 140 250 68 3 3 575 835 2,100 2,500 15.8
  NU222E 110 200 38 2.1 2.1 293 365 3,100 3,700 4.27
  NU2230 150 270 73 3 3 500 710 2,200 2,600 16.3
  NU2230E 150 270 73 3 3 660 980 2,000 2,400 19.7

A wide range of applications:

• agriculture and forestry equipment
• automotive and industrial gearboxes
• automotive and truck electric components, such as alternators
• electric motors
• fluid machinery
• material handling
• power tools and household appliances
• textile machinery
• two Wheeler.

Our Bearing Advantage:

1.ISO Standard

2.Bearing Small order accepted

3.In Stock bearing

4.OEM bearing service

5.Professional:20 years manufacture bearing

6.Customized bearing, Customer’s bearing drawing or samples accepted

7.Competitive price bearing

8.TT Payment or Western Union or PayPal

Our Company

Packaging Details 1 piece in a single box
50 boxes in a carton
20 cartons in a pallet
Nearest Port ZheJiang or HangZhou
Lead Time For stock parts: 1-5 days.
If no stock parts:
<200 pcs: 15-30 days
≥200 pcs: to be negotiated.


1.How do you make our business long-term and good relationship? 
– We keep good quality and competitive price to ensure our customers benefit ;
– We respect every customer as our friend and we sincerely do business and make friends with them,
  no matter where they come from.


2.Do you test all your goods before delivery?
– Yes, we have 100% test before delivery


3.What products does your company supply?
– Auto Bearings (Wheel Bearings, Wheel Hub Bearings, Clutch Bearings, Belt Tensioners and Water Pump Bearings etc. )    

-Industrial Bearings (Deep Groove Ball Bearings, Tapered Roller Bearings and Pillow Block Bearings).

Why You Should Get a New Timing Belt

A timing belt is a rubber belt with teeth that transfer rotary motion from the central motor to the drive pulley. It prevents the piston from striking the valves at a critical level. Unfortunately, these belts cost a lot to replace. Here are some reasons why you should consider getting a new one. If you’re not sure whether a new timing belt is necessary, read on. You can also save money by avoiding unnecessary repairs and replacements by choosing an aftermarket timing belt.

Timing belts are rubber belts with hard teeth

While it’s true that timing belts are commonly known as “drive belts,” there are several different types of belts that are used in engines. Despite their commonity, timing belts are made of different materials. The material used to make them is important because it can either negatively impact performance or negatively affect its life span. Whether it’s a car, truck, or motorcycle, timing belts are an essential part of your engine.
Among their many advantages, timing and drive belts are designed to reduce friction, increase speed, and transmit torque more efficiently. In fact, the design of timing belts is similar to that of a cam belt. Both belts work in conjunction with each other to increase the torque and speed of a vehicle. In both types, the teeth of the belt are aligned at the same angle. In a small-scale drive system, this elongation is minimal, but if the load is too high, the teeth of the belt will begin to jump or cog over the pulley’s teeth, causing the noise.
Timing belts are used to synchronize the movement of the crankshaft and camshaft. Timing belts have hard teeth on the inner side of the belt and interlock with the cogwheels on the crankshaft and camshafts. Because of this, they make it easier for the exhaust and intake valves to open and close at the proper time. Timing belts are made of high-10sile rubber, but they may also be polyurethane, welded urethane, or moulded polyurethane.
When a timing belt is worn, it may degrade. The teeth will gradually lose their shape over time and the belt will begin to slip. If the teeth become rounded, the belt may still work, but its timing will be off. Hence, it is vital to replace the timing belt if you notice these signs. If you find any damage, contact a qualified mechanic for repair. If the teeth are worn or damaged, consider replacing the entire belt.
When it comes to a car’s engine, timing is vital. Timing belts connect the internal moving parts of the engine. In addition to timing, they can also power water, oil, and injection pumps. And it’s vital to make sure your timing belt doesn’t get damaged because it will not function properly. So don’t neglect timing belts unless you’re certain they’re damaged.

They transfer rotary motion from the central motor to the drive pulley

A timing belt is a mechanical device that transfers rotary motion from a central motor to a drive pulley through a chain. The belt must be wide enough to accommodate the torque that will be produced by the design. The belt must be wider than the size selected for the drive pulley. In order to determine the correct belt width, the center-to-center distance between the drive pulley and the central motor is measured.
Unlike the elastic belt, which tends to stretch when pressed against a large load, the timing belt does not suffer from this problem. Instead, it exhibits low torsional stiffness, which allows it to transfer rotary motion efficiently. The timing belt also reduces the likelihood of slippage. This is because the cord material is very strong compared to the loads that it must handle.
The most common type of timing belt pulley is made of nylon. The advantage of nylon is that it has a natural lubrication surface and is relatively low-maintenance. It is also durable, malleable, and low-melting point. It is also highly resistant to wear and tear and is suitable for applications that are exposed to high temperatures. However, the belt must be cleaned and maintained on a regular basis.
A Timing belt can be used in a variety of applications. For instance, the timing belt is used in automotive engines. However, the timing belt is also found in stationary power generators, marine engines, and aviation engines. Additionally, it is used in conveyors, winches, treadmills, and washing machines. It also plays a crucial role in the curtain at a theater hall.
The timing belt can be flat, V-shaped, or trapezoidal. The latter is usually made of rubber. The distance between the 2 pulleys is between 5 and 10 meters. The flat belts transmit power through friction between the belt and the pulley. The efficiency of flat belts is approximately 98% and it makes very little noise. However, it must be used in conjunction with the appropriate motor drive. Ultimately, the engineers must choose the best 1 that can deliver the torque that the drive pulley needs to generate.

They prevent pistons from striking the valves on a critical level

In an interference engine, the valves and pistons share the same space in the cylinder, but they move at different rates. While 1 or more of the valves may open into the piston’s travel area, the other is closed and never makes contact with the piston. Timing belts prevent this critical collision from occurring and prevent the piston from damaging the engine. Most timing belts fail at start-up and shutdown. Check the car owner’s manual for recommended replacement intervals.
The timing belt synchronizes the rotation of the crankshaft and camshaft. The timing belt allows the piston to move without striking the valves, allowing the engine to perform its essential functions. The camshaft is used to push fuel and air into the cylinder. The valves close and open as the engine moves forward. When the engine is running, the timing belt prevents the piston from striking the valves on a critical level.
Because of their critical role in the engine, timing belts are often an overlooked component. Without proper timing, an engine will not work properly, and valve damage can be costly. If timing fails, the piston will strike the valves on a critical level, which will damage the engine. Timing belts are a vital automotive component, so make sure yours is in good condition.
A timing belt is a necessary part of your Subaru’s engine. It synchronizes the crankshaft and camshaft to prevent problems with the engine. If a timing belt breaks, the pistons will strike the open valves and cause massive engine damage. Timing belts must be replaced when recommended in your owner’s manual. If it breaks, the engine will shut down.

They cost a lot to replace

Timing belts are expensive to replace, with the average car owner paying $1,200 to have them replaced. Most cars have transverse engines, where the cam cover rests against the driver’s side of the engine. These specialty cars are notoriously difficult to service and require the services of a specialist mechanic. Timing belts are a complex system with a series of idler bearings and tensioner bushes to guide and drive the belt. These components are often replaced at the same time as other routine maintenance work, and they may cost you a bundle.
If you have a car that’s been in the shop for a while, timing belt replacement may be the only option. A timing belt that’s popped isn’t going to make the car run, so you’ll need to get it replaced. If you need the belt replaced, you can use a car service, or you can try to replace the timing belt yourself. It’s a good idea to get several quotes before making the decision to replace the belt.
Depending on the make and model of your car, timing belt replacement costs may range from $250 to more than $1,000. Prices will vary according to vehicle type, labor hours, and the brand of parts and labor. If you don’t have a mechanic handy, you can always use a free online tool like CZPT to get an estimate for timing belt replacement and find a mechanic near you. This will help you save money and avoid the hassle of spending a lot of money on an unnecessary repair.
While timing belts typically last between 60,000 and 100 thousand miles, you may only need to replace them once in your car’s lifetime. Timing belts may seem cheap at first, but if you’re planning on selling your car, you’ll want to avoid the expense of replacing your timing belt. If you don’t, your car’s engine may run poorly and cause your car to use more fuel than it should.

China Standard Cylindrical Roller Bearing for Gear Reducer 65X93.1X55mm     with Good qualityChina Standard Cylindrical Roller Bearing for Gear Reducer 65X93.1X55mm     with Good quality